Rope lights

HOW TO USE ROPE LIGHTS

NEXT >>2 WIRES ROPE

1. Where to cut

A. Can only be cut at the indicated place with scissors mark
B. After cutting, bend the ROPE LIGHTS, then cut off the extra copper wires

A

B

2. How to connect to power cord

A. With Power Connector
B. With Shrink Tube

A

B

3. How to connect between the rope lights

A. With Splice Connector
B. With Shrink Tube

A

B

4. How to connect to the controllers

A .With Power Connecotr

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

5. How to deal with the end of ROPE LIGHTS

A. Cover it with correct END CAP, then seal it with glue in order to make it waterproof or to avoid children's touch.

A

6. How to mount on the walls

A. With Mounting Clips
B. With Tie Straps
C. With Suctions
D. With Channels

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

C

D

7. For outdoor use, do not forget to seal every connecting points with silicon glues

Cautions:

A. Do not plug in before the installation/assembling of the ROPE LIGHTS is finished;
B. The Voltge of the Power source shouldn't be highter than the limited voltage of the ROPE LIGHTS;
C. Don't light on the ROPE LIGHTS while it's in the rolls;
D. Make sure to give the ROPE LIGHTS with enough space for cooling down when it's in use;
E: The ROPE LIGHTS has Max. using length:
For 240V --- 100m
For 120V --- 50m
For 24V --- 14m
For 12V --- 7m